|
Please
click on the photos below for a larger view |
 |
For
riders who require more support or prefer a more conventional looking
seat. You may choose either the standard Easy Seat or the optional
Butterfly Seat when ordering the Step 'n Go. To order the butterfly seat
in addition or separately, please see price list.
|
 |
Walk
alongside the rider to offer “behind the scenes” assistance when
required for balance, stopping or climbing small inclines. Available in
either right (standard) or left hand models. Also used to mount an
optional 2nd parking brake (as shown) for operation by companion.
|
 |
Designed
for riders who cannot squeeze a conventional brake lever. Can be mounted
on either the right or left (standard) side of the handlebars. Only one of
many braking adaptations.
|
 |
Designed
for a young boy with spastic quadriplegia, who required a large target to
activate the brake. Engages the brake by pushing anywhere on the paddle.
|
 |
Accommodate
any size foot, from child to adult. 2” (50mm) polypro strap with
sewn on Velcro loop attaches to industrial grade Velcro hook on the bottom
and inside of the foot pad. Just place and press - no buckles to adjust!
|
 |
The
footpad extensions were created for a young girl with AMC who wore a full
set of leg braces. This set the width of her stance at 20” (50.8 cm)
outside to outside. A large children’s hospital found the foot pad
extensions to be very useful for allowing children wearing an orthopedic
appliance to stand more securely on the footpads, as well as to facilitate
transferring and mounting the Step 'n Go. The footpad extensions allow the
use of footstraps. Requires hand tools for installation.
|
 |
Provides
additional dorsiflexion at the bottom of the downward stroke and helps to
keep the body weight centered on the heel for maximum power. Velcro loop
on bottom engages with the non-slip footpad surface. Use in conjunction
with footstraps. Available individually or in pairs.
|
 |
Easily
snaps onto the handlebars. Vinyl coated spring clips hold canes or
crutches securely on either side of the steering column. Does not
interfere with the steering or controls.
|
 |
The
Step 'n Go is designed to be ridden in a standing position; however, some
riders may require a bit of trunk support (proximal stabilization) or a
reference point to maintain balance. The back support is supplied with two
straps and adjusts both vertically and horizontally. Suitable for riders
up to 120 lbs.(55 kg) and 5’(1.5 m) height.
|
 |
Lets
you enjoy total adjustability of the seat position for use in a clinical
setting with multiple riders or to accommodate one rider as they grow. The
seat, which is more of a “bum rest”, adjusts vertically and
horizontally and can be suspended on top of the cover for smaller riders.
Suitable for riders up to 120 lbs.(55 kg) and 5’(1.5 m) height.
|
 |
Ideal
if you want to move the seat forward for a rider 5’(1.5 m) or taller.
Provides additional support in a more upright riding position.
|
|
Created
as a special request for a fast growing boy with CP who required
additional trunk stabilization. The back support will adjust laterally on
the seat post to provide the appropriate distance between the seat and the
back support. The system will adjust both vertically and horizontally.
Suitable for riders up to 120 lbs. (55 kg) and 5’(1.5 m) height.
|
|
Don’t
see what you need?
Call
today at 1-800-648-7335 for a free consultation to discuss your personal
needs.
|
